ISSN:
0032-3888
Keywords:
Chemistry
;
Chemical Engineering
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Chemistry and Pharmacology
,
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
,
Physics
Notes:
The computer aided design approach used in current applications of semicrystalline polyoxymethylene (POM) requires high strain-rate mechanical data. The primary aim of this work has been to measure the room temperature modulus and tensile strength of injection molded samples of POM of different molecular weights at cross-head speeds of between 10-5 ms-1. We observe no major transition in bulk mechanical behavior in this range of test speeds, the Young's modulus E, in particular, showing little strain rate dependence. This is rationalized on the basis of tensile tests over a range of temperatures, these indicating room temperature to correspond to the plateau in the E(T) curves (Tg for these materials is taken to be -70°C, and the DSC melting onset occurs at ∼ 170°C).The tensile strength increases as ∼log(d∊/dt) and the behavior is found to be highly nonlinear, strains to fail of the order of 1 being observed even at the highest strain rates, depending on the molecular weight. It is believed that the yield stress of th crystalline regions determines the tensile strength above Tg, the higher degree of crystallinity associated with lower molecular weights resulting in a slightly higher tensile strength. Nevertheless, failure is qualitatively brittle, with no necking and relatively little permanent deformation. This behavior is discussed in terms of morphological investigations of the fractured samples by optical and scanning electron microscopy (SEM).In attempting to relate ultimate failure to the molecular/crystalline structure of the samples, measurements of the critical stress intensity for crack initiation in mode I opening, KIC, as a function of crystallization temperature Tc have been carried out using compact tension specimens machined from injection molded and compression molded plaques. KIC increases with molecular weight and decreases with Tc at low test speeds (in spite of an increase in crystallinity with Tc). This is accounted for in terms of a crack shielding model for crack initiation and of molecular rearrangements occurring during crystallization which lead to a decrease in the effective entanglement density with Tc. The implications of this model are then compared with KIC results over a range of cross-head speeds and temperatures.
Additional Material:
16 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/pen.760351606
Permalink
