ALBERT

Description: The spatiotemporal variations in the atmospheric ventilation index (AVI) with the particulate matter (PM) concentrations in South Korea were investigated using a regional grid model derived from the National Center for AgroMeteorology and PM10 concentration data obtained from AirKorea and the Korea Meteorological Administration. To construct a high-resolution AVI database with 1 h time intervals and a spatial resolution of approximately 2.4 km, a medium-range prediction was performed using a regional model twice a week from December 2018 to November 2019. The resultant dataset was used to explore the seasonal patterns of the areal distribution of a novel index: Ventilation Index coupled with PM (VIP), defined by the ratio of the AVI to PM. To determine the effects of geography on the VIP, diurnal variations of the VIP were examined at three major cities in South Korea. The emphasis of the investigation was on major cities that are planned to be developed into smart cities. This study reveals the specific spatiotemporal structure of the AVI in South Korea for the first time at a high resolution and introduced the potential usefulness of the VIP. The results provide insights that could aid decision making for determining favorable locations for clean or polluted cities on an annual basis and can enable the sustainable management of fine PM in and around the areas of interest.

Description: Among the various methods used to improve the sound absorption capability of wood, we focused on delignification in Indonesian momala (Homalium foetidum) and Korean red toon (Toona sinensis). We performed gas permeability, pore size, and porosity analyses and evaluated how the change in the pore structure affects the sound absorption capabilities. Results show that delignification increased the through-pore porosity and improved sound absorption capability in both species. In addition, the air gap in the rear space maximized the sound absorption of momala and the red toon. The noise reduction coefficient (NRC) of delignified momala (90 min) with a 3 cm air gap was 0.359 ± 0.023. This is approximately 154.6% higher than that of untreated momala without an air gap. The NRC of delignificated red toon (90 min) with a 3 cm air gap was 0.324 ± 0.040, an increase of 604.3% over untreated red toon without an air gap.

Description: In this study, the sound absorption coefficient of three low density hardwoods – binuang, balsa and paulownia – were investigated. Their gas permeability and pore size were measured, and their pore shapes were classified into through pore, blind pored, and closed pore, as specified by the International Union of Pure and Applied Chemistry (IUPAC). Among the three species, obvious that paulownia had lowest sound absorption when the two of others showed higher sound absorption. Although paulownia is a high porosity wood, most of its vessels are blocked by tyloses; it is therefore difficult for sound waves to enter its pores, which results in poor sound absorption performance. This study showed that the higher the through pore porosity, the higher was the gas permeability, which led to improvement of the sound absorption performance. It was also found that the sound absorption coefficient of the three species woods increased at low frequencies as the size of an air cavity between the specimens and tube’s wall increased.

Description: This study investigates the effects of heat treatment time and presence of an air back cavity on the sound absorption performance of Indonesian momala (Homalium foetidum (Roxb.) Benth.) and Korean red toon (Toona sinensis (A. Juss.) M. Roem.) cross sections. To examine the porous characteristics of the two species before and after heat treatment, gas permeability, pore size, and porosity analyses were conducted. Additionally, the sound absorption coefficient was measured based on various heat treatment times and air back cavity sizes. The results showed that, with heat treatment at 210 °C for 6 h, the gas permeability improved by 4.3% for the momala and 38.5% for the red toon, the maximum pore size was improved by 5.25% in the momala and 26.0% in the red toon, and the through-pore porosity improved by 22.7% for the momala and 117.0% for the red toon. Due to these pore structure changes, the noise reduction coefficient (NRC) of the heat-treated momala improved by 6.8%. When a 3-cm air back cavity was applied to the heat-treated momala, the NRC was improved to 92.5%. Similarly, when the same air back cavity was applied to the heat-treated red toon, the NRC was improved to 190.7%. This study demonstrated that an increase in pore size and through-pore porosity by heat treatment triggered an increase in the sound absorption coefficient. Additionally, when an air cavity was applied, the sound absorption coefficient of both heat-treated wood species was increased at low frequency. From the results of this study, we expected that heat-treated momala and red toon cross-sections can be utilized as eco-friendly ceiling materials with sound absorption function.