ALBERT

Description: The limited durability of slippery lubricant-infused porous surfaces (SLIPS) restricts their practical applications. Inspired by the epidermal glands of skins, we developed a facile approach to durable SLIPS with gland-like storage and release functions for icephobicity. By introducing a hybrid surfactant as a lubricant into the polydimethylsiloxane (PDMS) matrix, lubricant capsules were formed and mono-dispersed in the matrix, working as gland-like structures to release lubricant. The obtained SLIPS showed durable low ice adhesion strength and thermal durability simultaneously. In detail, the enhanced durability for icephobicity was demonstrated by 20 icing/deicing tests, in which the lubricant remains on the surface; the coatings showed negligible weight loss when stored at 100 °C for 60 h, displaying pronounced thermal durability of the slippery effect. Our current strategy sheds new light on a facile fabrication of mechanically and thermally durable SLIPS for icephobicity.

Description: Low ice adhesion surfaces are a promising anti-icing strategy. However, reported ice adhesion strengths cannot be directly compared between research groups. This study compares results obtained from testing the ice adhesion strength on two types of surfaces at two different laboratories, testing two different types of ice with different ice adhesion test methods at temperatures of −10 and −18 °C. One laboratory used the centrifuge adhesion test and tested precipitation ice and bulk water ice, while the other laboratory used a vertical shear test and tested only bulk water ice. The surfaces tested were bare aluminum and a commercial icephobic coating, with all samples prepared in the same manner. The results showed comparability in the general trends, surprisingly, with the greatest differences for bare aluminum surfaces at −10 °C. For bulk water ice, the vertical shear test resulted in systematically higher ice adhesion strength than the centrifugal adhesion test. The standard deviation depends on the surface type and seems to scale with the absolute value of the ice adhesion strength. The experiments capture the overall trends in which the ice adhesion strength surprisingly decreases from −10 to −18 °C for aluminum and is almost independent of temperature for a commercial icephobic coating. In addition, the study captures similar trends in the effect of ice type on ice adhesion strength as previously reported and substantiates that ice formation is a key parameter for ice adhesion mechanisms. Repeatability should be considered a key parameter in determining the ideal ice adhesion test method.