ALBERT

Description: This paper proposes a novel capacitive liquid metal microelectromechanical system (MEMS) inclinometer sensor and introduces its design, fabrication, and signal measurement. The sensor was constructed using three-layer substrates. A conductive liquid droplet was rolled along an annular groove of the intermediate substrate to reflect angular displacement, and capacitors were used to detect the position of the droplet. The numerical simulation work provides the working principle and structural design of the sensor, and the fabrication process of the sensor was proposed. Furthermore, the static capacitance test and the dynamic signal test were designed. The sensor had a wide measurement range from ±2.12° to ±360°, and the resolution of the sensor was 0.4°. This sensor further expands the measurement range of the previous liquid droplet MEMS inclinometer sensors.

Description: Complex natural disasters often cause people to suffer hardships, and they can cause a large number of casualties. A population that has been affected by a natural disaster is at high risk and desperately in need of help. Even with the timely assessment and knowledge of the degree that natural disasters affect populations, challenges arise during emergency response in the aftermath of a natural disaster. This paper proposes an approach to assessing the near-real-time intensity of the affected population using social media data. Because of its fatal impact on the Philippines, Typhoon Haiyan was selected as a case study. The results show that the normalized affected population index (NAPI) has a significant ability to indicate the affected population intensity. With the geographic information of disasters, more accurate and relevant disaster relief information can be extracted from social media data. The method proposed in this paper will benefit disaster relief operations and decision-making, which can be executed in a timely manner.

Description: National large-scale soil and water conservation controls on the Gangjiang River basin have been documented, but the effect of governance on regional watershed hydrology and how the main driving factors act have not been systematically studied yet. To do this, this study evaluated changing trends and detected transition years for both streamflow and sediment discharge using long-term historical records at seven hydrological stations in the Ganjiang River basin over the past 50 years. The double mass curve (DMC) method was used to quantify the effects of both climate change and human activities on hydrological regime shifts. The results showed that the distributions of precipitation, streamflow, and sediment discharge within a year are extremely uneven and mainly concentrated in the flood season of Jiangxi Province. None of the stations showed significant trends over time for either annual precipitation or streamflow, while the annual sediment discharge at most stations decreased significantly over time. The estimation of sediment discharge via DMC indicated that after the transition years, there were rapid reductions in sediment discharge at all hydrological stations, and the average decline degree of midstream and downstream were much larger than that of upstream. Human activities, especially the increase of vegetation cover and construction of large and medium-sized reservoirs, provided a significantly greater contribution to the reduction of sediment discharge than did precipitation changes. As a case study of river evolution under global change environment, this study could provide scientific basis for the control of soil erosion and the management of water resources in Ganjiang River, as well as for the related research of Poyang Lake and the Yangtze River basin of China.

Description: Electrolytic water splitting with evolution of both hydrogen (HER) and oxygen (OER) is an attractive way to produce clean energy hydrogen. It is critical to explore effective, but low-cost electrocatalysts for the evolution of oxygen (OER) owing to its sluggish kinetics for practical applications. Fe-based catalysts have advantages over Ni- and Co-based materials because of low costs, abundance of raw materials, and environmental issues. However, their inefficiency as OER catalysts has caused them to receive little attention. Herein, the FeS2/C catalyst with porous nanostructure was synthesized with rational design via the in situ electrochemical activation method, which serves as a good catalytic reaction in the OER process. The FeS2/C catalyst delivers overpotential values of only 291 mV and 338 mV current densities of 10 mA/cm2 and 50 mA/cm2, respectively, after electrochemical activation, and exhibits staying power for 15 h.

Description: ABSTRACT With the progress in computational power and seismic acquisition, elastic reverse time migration is becoming increasingly feasible and helpful in characterizing the physical properties of subsurface structures. To achieve high‐resolution seismic imaging using elastic reverse time migration, it is necessary to separate the compressional (P‐wave) and shear (S‐wave) waves for both isotropic and anisotropic media. In elastic isotropic media, the conventional method for wave‐mode separation is to use the divergence and curl operators. However, in anisotropic media, the polarization direction of P waves is not exactly parallel to the direction of wave propagation. Also, the polarization direction of S waves is not totally perpendicular to the direction of wave propagation. For this reason, the conventional divergence and curl operators show poor performance in anisotropic media. Moreover, conventional methods only perform well in the space domain of regular grids, and they are not suitable for elastic numerical simulation algorithms based on non‐regular grids. Besides, these methods distort the original wavefield by taking spatial derivatives. In this case, a new anisotropic wave‐mode separation scheme is developed using Poynting vectors. This scheme can be performed in the angle domain by constructing the relationship between group and polarization angles of different wave modes. Also, it is performed pointwise, independent of adjacent space points, suitable for parallel computing. Moreover, there is no need to correct the changes in phase and amplitude casued by the derivative operators. By using this scheme, the anisotropic elastic reverse time migration is more efficiently performed on the unstructured mesh. The effectiveness of our scheme is verified by several numerical examples. This article is protected by copyright. All rights reserved

Description: Lattice dynamics and phase transitions of Aurivillius ferroelectric Bi 3 Ti 1− x W x NbO 9+δ (BTWN100 x , 0 ≤ x ≤ 15%) ceramics have been investigated by temperature-dependent Raman spectra (80–800 K) and far-infrared (FIR) reflectance spectra (6–300 K). The frequency, intensity, and line width of phonon modes as well as complex dielectric functions of BTWN100 x ceramics have been extracted by fitting Raman and FIR reflectance spectra with the multi-Lorentzian oscillator model. It was found that the dielectric constants at a certain frequency region become lower with increasing W compositions at room temperature due to the compressive stress on W–O bands. Moreover, the temperature-dependent behavior of optical phonon modes in BTWN100 x ceramics indicates that there are two intermediate phases during the phase transition from paraelectric I 4/ mmm to ferroelectric A 2 1 am phase on cooling. The phase diagram of BTWN100 x ceramics as a function of W composition has been improved.

Description: Aerosol activation into cloud droplets is an important process that governs aerosol indirect effects. The advanced treatment of aerosol activation by Fountoukis and Nenes (2005) and its recent updates, collectively called the FN series, have been incorporated into a newly developed regional coupled climate-air quality model based on the Weather Research and Forecasting model with the physics package of the Community Atmosphere Model version 5 (WRF-CAM5) to simulate aerosol-cloud interactions in both resolved and convective clouds. The model is applied to East Asia for two full years of 2005 and 2010. A comprehensive model evaluation is performed for model predictions of meteorological, radiative, and cloud variables, chemical concentrations, as well as column mass abundances against satellite data and surface observations from air quality monitoring sites across East Asia. The model performs overall well for major meteorological variables including near surface temperature, specific humidity, and wind speed, precipitation, cloud fraction, precipitable water, downward shortwave and longwave radiation, as well as column mass abundances of CO, SO 2 , NO 2 , HCHO, and O 3 in terms of both magnitudes and spatial distributions. Larger biases exist in the predictions of surface concentrations of CO and NO x at all sites and SO 2 , O 3 , PM 2.5 , and PM 10 concentrations at some sites, aerosol optical depth, cloud condensation nuclei over ocean, cloud droplet number concentration (CDNC), cloud liquid and ice water path, and cloud optical thickness. Compared with the default Abdul-Razzack Ghan (2000) parameterization, simulations with the FN series produce ~107-113% higher CDNC, with half of the difference attributable to the higher aerosol activation fraction by the FN series, and the remaining half due to feedbacks in subsequent cloud microphysical processes. With the higher CDNC, the FN series are more skillful in simulating cloud water path, cloud optical thickness, downward shortwave radiation, shortwave cloud forcing, and precipitation. The model evaluation identifies several areas of improvements including emissions and their vertical allocation as well as model formulations such as aerosol formation, cloud droplet nucleation, and ice nucleation.

Description: ABSTRACT The physiological role of cystic fibrosis transmembrane conductance regulator (CFTR) in keratinocytes and skin wound healing is completely unknown. The present study shows that CFTR is expressed in the multiple layers of keratinocytes in mouse epidermis and exhibits a dynamic expression pattern in a dorsal skin wound healing model, with diminishing levels observed from Day 3 to Day 5 and re-appearing from Day 7 to Day 10 after wounding. Knockdown of CFTR in cultured human keratinocytes promotes cell migration but inhibits differentiation, while overexpression of CFTR suppresses migration but enhances differentiation, indicating an important role of CFTR in regulating keratinocyte behavior. In addition, we have demonstrated a direct association of CFTR with epithelial junction formation as knockdown of CFTR downregulates the expression of adhesion molecules, such as E-cadherin, ZO-1 and β-catenin, and disrupts the formation of cell junction, while overexpression of CFTR enhances cell junction formation. More importantly, we have shown that ΔF508 cftr -/- mice with defective CFTR exhibit delayed wound healing as compared to wild type mice, indicating that normal function of CFTR is critical for wound repair. Taken together, the present study has revealed a previously undefined role of CFTR in regulating skin wound healing processes, which may have implications in injury repair of other epithelial tissues. This article is protected by copyright. All rights reserved

Description: Micromixing scale L is proposed to characterize the micromixing performance of microdevices. It is defined to be the smallest scale within which homogenization is only realized by molecular diffusion, indicating the homogeneous mixing ability of a certain microdevice at specific operating conditions. An approach that integrates numerical simulation with experimental measurement has been developed to establish the correlation between L and segregation index X S . The Villermaux/Dushman reaction was conducted in commonly used T-junction micromixer to determine its micromixing scales. The validity and reliability of this new approach have been demonstrated by employing another parallel competing reaction based on both the simulation results and the experimental data.

Description: The Fanniidae is one of four families in the superfamily Muscoidea (Diptera), including some important medical and hygienic flies. There is a paucity of reports on the ultrastructure of olfactory sensilla for the fanniid species. To provide more information on the morphology of the antennal and palpal sensilla of fanniid fly, Fannia hirticeps (Stein, 1892) has been studied using scanning electron microscopy. The first two antennal segments, scape and pedicel, are covered by microtrichiae and several chaetic sensilla. Six distinct morphological types of sensilla are recorded on the antennal funiculus, including one trichoid, two basiconic, two coeloconic sensilla, and one clavate sensilla. The measurement and density of each sensilla type are also provided. The trichoid sensilla tend to be longer and denser toward the apex of antennal funiculus. Basiconic sensilla spread all over the funicular surface. F. hirticeps bears two types of coeloconic sensilla, type 2 coeloconic sensilla distributed on the distal part of the anterior surface, whereas type 1 distributed on the rest of the funiculus. Clavate sensilla are found on the base of antennal funiculus. Only one large sensory pit is located on the posterior surface. Maxillary palps bear one type of basiconic sensilla. These results are compared with eight other muscid flies. Our findings provide a morphological basis for future investigations on olfactory-mediated behavior of this group. Microsc. Res. Tech. 2012. © 2012 Wiley Periodicals, Inc.